•Severe environment
•Historical design
•Leaded radial MLCC capacitor
•Epoxy molded
•High reliability, 100% burn in
•Available in NPO, N2T, BX, 2X1, X7R
•Equivalent to wide range of concurrent design
•Custom voltage, package size, capacitance value on request
•Tested in accordance to CECC 32100 and AEC-Q200
•NPO version CECC 30600 et NFC 83-131 compliant
•X7R version CECC 30700 et NFC 83-132 compliant
•2C1 version NF 83-132 compliant
•High Reliability option : 168 hours burn in
ELECTRICAL CHARACTERISTICS :
at + 25°C unless otherwise specified
OPERATING TEMPERATURE :
X7R, N2T : - 55°C, + 125°C
NPO : - 55°C, + 125°C
TEMPERATURE COEFFICIENT :
NPO : ± 30ppm
N2T : -2200 ± 350 ppm/C°
X7R : ± 15% with 0Vdc applied
BX : +15% - 25% under Un
2C1 : +20% - 30% under Un
DISSIPATION FACTOR:
NP0 : ≤ 1.10-3 at 1Vrms and 1MHz for values ≤ 1000pF
≤ 1.10-3 at 1Vrms and 1KHz for values > 1000pF
N2T : ≤ 1.10-3 at 1Vrms and 1MHz for values ≤ 1000pF
≤ 1.10-3 at 1Vrms and 1KHz for values > 1000pF
X7R : ≤ 0.025 at 1kHz for C ≥ 100pF
BX : ≤ 0.025 at 1kHz and 1MHz for values ≤ 1000pF
2C1 : ≤ 0.025 at 1kHz and 1MHz for values ≤ 1000pF
INSULATION RESISTANCE (IR) :
25°C/Un 105 MOhm or 1000 Ohm-Farad whichever is less
125°C/Un 104 MOhm or 100 Ohm-Farad whichever is less
DIELECTRIC STRENGTH TEST :
2.5U U≤200V | U+250V 200 for 5s with 50mA max charging current
BURN IN :
48 hours 125°C 2U U≤500 | 1.5U 500
SR |
41 |
Y |
102 |
J |
A |
V |
XX |
SERIES |
SIZE |
DIELECTRIC |
CAPACITANCE |
TOLERANCE |
VOLTAGE |
PACKAGING |
SPECIAL |
SR |
41 |
A = NP0 |
Expressed in picofarads (pF). |
A = ±0.05pF if < 10pF and 0.05% if > 10pF B = ± 0.1pF C = ± 0,25pF |
X = 25 V P = 250 V G = 1 KV H = 2 KV I = 3 KV K = 4 KV L = 5 KV 6 = 6 KV 8 = 8 KV 10 = 10 KV 15 = 15 KV K=40000L=5000 |
V = Bulk |
- BM = BME Dxx = Reliabilty spec Exx = Sorting spec |