ELECTRICAL CHARACTERISTICS :
at + 25°C unless otherwise specified
OPERATING TEMPERATURE :
- 55°C, + 125°C
TEMPERATURE COEFFICIENT :
X7R : ± 15% with 0Vdc applied
BX : +15% -25% at rated voltage
DISSIPATION FACTOR :
≤ 2.5% at 1kHz for C ≥ 100pF
INSULATION RESISTANCE (IR) :
25°C/Un 105 MOhm or 1000 Ohm-Farad whichever is less
125°C/Un 104 MOhm or 100 Ohm-Farad whichever is less
DIELECTRIC STRENGTH TEST :
Performed per method 103 of EIA 198-2-E
1.2Un for 5s with 50mA max charging current
|
0204 |
0306 |
0505 |
0508 |
0612 |
1111 | |
|
Min |
1.0 nF |
1.0 nF |
1.0 nF |
1.0 nF |
1.0 nF |
1.0 nF |
|
6.3V |
22 nF |
220 nF |
56 nF |
1.0 µF |
1.5 µF |
270 nF |
|
10V |
150 nF |
56 nF |
1.0 µF |
1.5 µF |
270 nF | |
|
16V |
68 nF |
56 nF |
220 nF |
330 nF |
270 nF | |
|
25V |
22 nF |
56 nF |
100 nF |
220 nF |
270 nF | |
|
50V |
56 nF |
100 nF |
150 nF |
270 nF |
|
0805 |
Y |
103 |
K |
C |
X |
B |
XX |
|
SIZE |
DIELECTRIC |
CAPACITANCE |
TOLERANCE |
VOLTAGE |
TERMINATION |
PACKAGING |
SPECIAL PARAMETERS |
|
0204 0306 0508 0612 |
Y = X7R |
Expressed in picofarads (pF). The first two digits are significant, the third digit give the number of noughts. Example : 102 = 1 000pF |
J = ± 5% |
R = 6.3V Q = 10V J = 16V X = 25V A = 50V |
X = Nickel Tin F = Palladium-Silver P = Polymer Tin (Flex) C = Copper Tin (Non magnetic) W = Nickel Gold H = Dipped SnPb I = Electrolytic SnPb |
B = Reel V = Bulk |
- BM = BME Dxx = Reliabilty spec Exx = Sorting spec |
Cross References
