•Severe environement
•Historical design
•Highly reliable design
•Epoxy coating option
•Available in NPO, N2T, BX, 2X1, X7R
•Non magnetic option
•Equivalence to most concurent design (cf cross references chart)
ELECTRICAL CHARACTERISTICS :
at + 25°C unless otherwise specified
OPERATING TEMPERATURE :
- 55°C, + 125°C
TEMPERATURE COEFFICIENT :
NPO : ± 30ppm
N2T : -2200 ± 350 ppm/C°
X7R : ± 15% with 0Vdc applied
BX : +15% - 25% under Un
2C1 : +20% - 30% under Un
DISSIPATION FACTOR:
NP0 : ≤ 1.10-3 at 1Vrms and 1MHz for values ≤ 1000pF
≤ 1.10-3 at 1Vrms and 1KHz for values > 1000pF
N2T : ≤ 1.10-3 at 1Vrms and 1MHz for values ≤ 1000pF
≤ 1.10-3 at 1Vrms and 1KHz for values > 1000pF
X7R : ≤ 0.025 at 1kHz for C ≥ 100pF
BX : 2,5% max
2C1 : 2,5% max
INSULATION RESISTANCE (IR) :
25°C/Un 105 MOhm or 1000 Ohm-Farad whichever is less
125°C/Un 104 MOhm or 100 Ohm-Farad whichever is less
DIELECTRIC STRENGTH TEST :
1.2Un for 5s with 50mA max charging current
BURN IN :
48 hours 125°C 2Un if Un<500V and 1.5 Un if Un >500V
SRMC |
41 |
Y |
102 |
J |
A |
C |
E |
B |
- |
SERIES |
SIZE |
DIELECTRIC |
CAPACITANCE |
TOLERANCE |
VOLTAGE |
TERMINATION |
COATING |
PACKAGING |
SPECIAL |
SRMC |
31 to 96 |
A = NP0 P = N2T X = BX Y=X7R BY=2C1 |
Expressed in picofarads (pF). The first two digits are significant, the third digit give the number of noughts. Example : 102 = 1 000pF |
A = ±0.05pF if < 10pF and 0.05% if > 10pF B = ± 0.1pF C = ± 0,25pF |
X = 25V A = 50V B = 100V C = 200V E = 500V G = 1000V |
- : Sn C : Non magnetic |
- = Varnished Coatng H = EpoxyCoating |
B = Reel V = Bulk |
- BM = BME Dxx = Reliabilty spec Exx = Sorting spec |