•Smoothing signals
•Energy storage
•Converters, inverters
•Low ESR and ESL design
•Auto range based on AECQ -200 generic requirement
•Extended range based on commercial grade
•Equivalent to concurrent design
ELECTRICAL CHARACTERISTICS :
at + 25°C unless otherwise specified
OPERATING TEMPERATURE :
- 55°C, + 125°C
TEMPERATURE COEFFICIENT :
X7R : ± 15% with 0Vdc applied
DISSIPATION FACTOR:
X7R : 5% (10V), 3.5% (16V and 25V) and ≤ 2.5 (50V to 630V) at 1kHz
INSULATION RESISTANCE (IR) :
25°C/Un 105 MOhm or 1000 Ohm-Farad whichever is less
125°C/Un 104 MOhm or 100 Ohm-Farad whichever is less
DIELECTRIC STRENGTH TEST :
2.5Un U≤200V | Un+250V U=250V
for 5s with 50mA max charging current
|
SRH |
D |
1210 |
Y |
106 |
K |
Q |
A |
B |
- |
|
SERIE |
CHIPS |
SIZE |
DIELECTRIC |
CAPACITANCE |
TOLERANCE |
VOLTAGE |
RANGE |
PACKAGING |
SPECIAL |
|
SRH |
S = 1 chip |
1210 |
A = NPO |
Expressed in picofarads (pF) The first two digits are significant, the third digit gives the number of noughts Example : 102 = 1000pF |
J = ±5% (1 chip NPO) M = ±20% (1 or 2 chip Class II) |
Q = 10V J = 16V X = 25V A = 50V U = 63V B = 100V P = 250V |
A = AECQ |
B = Reel |
Dxx = Reliability parameters |
Cross References
