ELECTRICAL CHARACTERISTICS :
at + 25°C unless otherwise specified
OPERATING TEMPERATURE :
- 55°C, + 125°C
TEMPERATURE COEFFICIENT :
-2200 ± 350 ppm/C° with 0Vdc applied
DISSIPATION FACTOR :
≤ 1.10-3 at 1Vrms and 1MHz for values ≤ 1000pF
≤ 1.10-3 at 1Vrms and 1KHz for values > 1000pF
INSULATION RESISTANCE (IR) :
25°C/Un 105 MOhm or 1000 Ohm-Farad whichever is less
125°C/Un 104 MOhm or 100 Ohm-Farad whichever is less
DIELECTRIC STRENGTH TEST :
Performed per method 103 of EIA 198-2-E
1.2Un for 5s with 50mA max charging current
|
5440 |
P |
101 |
J |
T |
X |
B |
- |
|
SIZE |
DIELECTRIC |
CAPACITANCE |
TOLERANCE |
VOLTAGE |
TERMINATION |
PACKAGING |
SPECIAL PARAMETERS |
|
0805 1206 1210 1808 1812 1825 2220 2225 3640 4040 5440 5550 6660 8060 80150 |
P = N2T |
Expressed in picofarads (pF). The first two digits are significant, the third digit give the number of noughts. Example : 102 = 1 000pF |
A = ±0.05pF if < 10pF and 0.05% if > 10pF B = ± 0.1pF C = ± 0,25pF |
G = 1KV O = 1.5KV H =2KV I = 3KV K = 4KV L = 5KV 8 = 8KV 10 = 10KV 12 = 12KV 15 =1 5KV |
X = Nickel Tin F = Palladium-Silver P = Polymer Tin C = Copper Tin W = Nickel Gold |
B = Reel V = Bulk |
- Dxx = Reliabilty spec Exx = Sorting spec |
Cross References
