Noise suppression in power lines for High Current Applications
ELECTRICAL CHARACTERISTICS :
at + 25°C unless otherwise specified
OPERATING TEMPERATURE :
- 55°C, + 125°C
TEMPERATURE COEFFICIENT :
X7R : ± 15% with 0Vdc applied
AGING RATE :
X7R : 2% per decade
Dissipation Factor :
X7R : ≤ 0.025 at 1kHz
INSULATION RESISTANCE (IR) :
25°C/Un 105 MOhm or 1000 Ohm-Farad whichever is less
125°C/Un 104 MOhm or 100 Ohm-Farad whichever is less
DIELECTRIC STRENGTH TEST :
2.5Un U≤200V | U+250V 200
|
1812 |
2220 |
|
|
CURRENT (A) |
2-10 |
10-20 |
|
MIN |
100nF |
100nF |
|
50V |
100nF - 220nF |
100nF - 470nF |
|
100V |
100nF - 150nF |
100nF - 330 nF |
|
200V |
10nF - 68nF |
100nF - 150nF |
|
500V |
47nF |
68nF |
|
ORDERING |
1812 |
2220 |
||
|
CURRENT |
X7R |
1 |
2A - 10A |
10A - 20A |
|
MPF |
0805 |
Y |
103 |
K |
A |
X |
B |
|
|
SERIES |
SIZE |
DIELECTRIC |
CAPACITANCE |
TOLERANCE |
VOLTAGE |
TERMINATION |
PACKAGING |
SPECIAL |
|
MPF |
1812 2220 |
Y = X7R |
Expressed in picofarads (pF). The first two digits are significant, the third digit give the number of noughts. Example : 102 = 1 000pF |
K = ± 10% M = ± 20% |
A = 50V B = 100V C = 200V E = 500V |
X = Nickel Tin F = Palladium-Silver P = Polymer Tin (Flex) C = Copper Tin (Non magnetic) W = Nickel Gold |
B = Reel V = Bulk |
- Dxx = Reliabilty spec Exx = Sorting spec |
Cross References
